Fiat Alfa Romeo Lancia Bosch EDC16C39 TunerPro chiptuning maps.
New bin definition files (xdf) series for Fiat, Alfa Romeo and Lancia with engine control unit Bosch EDC16C39.
Supported cars:
- Alfa Romeo 147 1.9L JTDm
- Alfa Romeo 159 1.9L JTDm
- Alfa Romeo 159 2.0L JTDm
- Alfa Romeo 159 2.4L JTDm
- Alfa Romeo 166 2.4L JTDm
- Alfa Romeo Brera 2.0L JTDm
- Alfa Romeo Brera 2.4L JTDm
- Alfa Romeo Giulietta 1.6L JTDm
- Alfa Romeo Giulietta 2.0L JTDm
- Alfa Romeo GT 1.9L JTDm
- Alfa Romeo GT 2.0L JTDm
- Alfa Romeo Mito 1.6L JTDm
- Alfa Romeo Spider 2.4L JTDm
- Fiat Bravo 1.6L MJET
- Fiat Bravo 1.9L MJET
- Fiat Croma 1.9L MJET
- Fiat Croma 2.4L MJET
- Fiat Doblò 1.6L MJET
- Fiat Doblò 1.9L MJET
- Fiat Doblò 2.0L MJET
- Fiat Grande Punto 1.6L MJET
- Fiat Grande Punto 1.9L MJET
- Fiat Idea 1.6L MJET
- Fiat Linea 1.6L MJET
- Fiat Multipla 1.9L MJET
- Fiat Punto Evo 1.6L MJET
- Fiat Scudo 1.6L MJET
- Fiat Sedici 1.9L MJET
- Fiat Sedici 2.0L MJET
- Fiat Stilo 1.9L MJET
- Lancia Delta 1.6L MJET
- Lancia Delta 1.9L TwinTurbo MJET
- Lancia Delta 2.0L MJET
- Lancia Musa 1.6L MJET
- Lancia Thesis 2.4L MJET
and all other vehicles with Bosch EDC16C39.
Knowledge, experience, calibration studies and bench tests are the starting point for the development of the above mentioned bin definition files (xdf).
A free chiptuning software combined with competitive prices (60 euro) are the milestones of our philosophy.
Through the definition files, the remapping software TunerPro identifies the engine working parameters which allow to obtain the maximum power and torque without affecting the degree of reliability.
Please note: the maps listed may not be present in all vehicles because of the different software update and calibration numbers.
Prices
Prices (60 euro) and supported vehicles are available in the main Cars bin definition files area.
Dyno Tests
Example of Stage1 on Alfa Romeo 159 2.4L JTDm: +34hp / +70Nm
TunerPro available maps
- Injection: fuel limiter by temperature, fuel quantity limiter, fuel limiter by fuel temperature, smoke limiter, conversion of injection volume to injection time, fuel conversion from torque.
- Start of Injection: base value for start of injection angle, base value for start of injection angle during DPF regeneration.
- Torque: driver’s behaviour, torque limiter, max engine torque, max torque (divided by gear).
- Boost: variable geometry, basic boost pressure setpoint, replace value for static boost pressure, boost pressure setpoint limiting map, boost limiter.
- Rail Pressure: basic fuel pressure setpoint, fuel pressure setpoint maximum limitation, fuel pressure setpoint maximum limitation by fuel temperature, fuel pressure setpoint maximum limitation by fuel quantity.
- Special Functions: EGR deactivation, Swirl deactivation (where available).
