info@oldskulltuning.com

Jeep, Fiat, Chrysler, Dodge GPEC3 TunerPro maps

jeep compass remap ecu continental gpec3

Jeep, Fiat, Chrysler, Dodge Continental GPEC3 XDF and OLSX.

jeep compass remap ecu continental gpec3

New TunerPro bin definition files (xdf) series for FCA group (Jeep, Fiat, Chrysler, Dodge) with engine control unit Continental GPEC3.

Supported cars and LCV:

  • Chrysler 200 2.4L Tigershark
  • Dodge Dart (PF) 2.0L Tigershark
  • Dodge Dart (PF) 2.4L Tigershark
  • Fiat 500X 2.4L Tigershark
  • Fiat Toro 2.4L Tigershark
  • Jeep Cherokee (KL) 2.0L Tigershark
  • Jeep Cherokee (KL) 2.4L Tigershark
  • Jeep Compass (MP/552) 2.4L Tigershark
  • Jeep Renegade (BU) 2.0L Tigershark
  • Jeep Renegade (BU) 2.0L Tigershark
  • Dodge Ram Promaster City 2.4L Tigershark

and all other vehicles with ECU Continental GPEC3.

Knowledge, experience, calibration studies and bench tests are the starting point for the development of the above mentioned bin definition files (xdf).

A free chiptuning software combined with competitive prices (70 euro) are the milestones of our philosophy.

Through the definition files, the remapping software TunerPro identifies the engine working parameters which allow to obtain the maximum power and torque without affecting the degree of reliability.

Please note: the maps listed may not be present in all vehicles because of the different software update and calibration numbers.

jeep renegade remap ecu continental gpec3

Prices

Prices (70 euro) and supported vehicles are available in the main Cars bin definition files area and LCV bin definition area.

Dyno Tests

Example of Stage1 on Jeep Compass 2.4L: +10hp / +15Nm

TunerPro available maps

  • Air Calculation: volumetric efficiency, air mass throught throttle body, volumetric efficiency correction by intake temperature and pressure, volumetric efficiency correction by engine temperature and pressure, map for calculation of nominal charge.
  • Fuel: injection compensation, fuel quantity injected, lambda base value.
  • Spark Advance: optimal ignition angle, ignition angle base map, ignition angle limit, minimum ignition angle, ignition angle correction by intake air temperature, ignition angle correction by engine temperature, knock detection factor.
  • Torque: pedal accelerator by torque request, torque limiter by speed, torque limiter by gear and speed, torque request by pedal accelerator, torque request by pedal accelerator and speed, max torque.
  • Temperature: exhaust gas temperature.
  • Special Functions: RPM limiter, RPM limiter by engine coolant temperature, RPM limiter by oil temperature, RPM limiter in neutral, speed limiter.
fca ecu continental gpec3 remap with tunerpro

WinOLS OLSX mappack

After the many requests received by our customers, who already buy our TunerPro XDF definition files, we have implemented our offer with WinOLS5 mappack (OLSX) service.

These map packs contain the same maps already available inside our TunerPro XDF.

The OldSkullTuning mappacks contain all the most important maps needed to create a stage1 and stage2 tuned file.

winols5 mappack
winols ols

We only sell closed (olsx) mappacks: closed means you can use it only with your Winols client code and the maps cannot be exported/used for new projects/mappack. OLSX purchased can be only used combined with the relevant binary file, previously shared with us.

Terms & Conditions

To simplify the purchase process, the mappack prices will be 50% more than TunerPro xdf.

Prices

Prices (105 euro) and supported vehicles are available in the main Cars bin definition files area and LCV bin definition area.

WinOLS OLSX mappack available maps (same as TunerPro XDF)

continental gpec3 olsx mappack winols
gpec3 winols mappack ecu tuning

Tags:

Hello Tuner!

Subscribe to our weekly Newsletter?

Accept privacy policy