Jeep, Chrysler, Dodge Motorola NGC3 ecm tuning
New TunerPro bin definition files (xdf) series for Jeep, Chrysler, Dodge with engine control unit Motorola NGC3.
Some of the supported vehicles:
- Chrysler 300 2.4L
- Chrysler 300 2.7L
- Chrysler 300C 3.5L V6
- Chrysler 300C 5.7L V8
- Chrysler PT Cruiser 2.0L
- Chrysler PT Cruiser 2.4L
- Chrysler PT Cruiser 2.4L Turbo
- Chrysler Voyager 2.4L
- Dodge Charger 2.7L
- Dodge Charger 3.5L V6
- Dodge Charger 5.7L V8
- Dodge Charger SRT 6.1L V8
- Dodge Dakota 3.7L V6
- Dodge Dakota 4.7L V6
- Dodge Durango 3.7L V6
- Dodge Durango 4.7L V6
- Dodge Durango 5.7L V8
- Dodge Liberty 2.4L
- Dodge Liberty 3.7L V6
- Dodge Magnum 2.7L
- Dodge Magnum 3.5L V6
- Dodge Magnum 5.7L V8
- Dodge Magnum 6.1L V8
- Dodge Neon 2.4L Turbo
- Dodge Ram 1500 3.7L V6
- Dodge Ram 1500 4.7L V8
- Dodge Ram 1500 5.7L V8
- Jeep Grand Cherokee 3.7L V6
- Jeep Grand Cherokee 4.7L V6
- Jeep Grand Cherokee 5.7L V8
- Jeep Grand Cherokee SRT 6.1L V8
- Jeep Wrangler 2.4L
- Jeep Wrangler 4.0L
and all other vehicles with ECM Motorola NGC3.
Knowledge, experience, calibration studies and bench tests are the starting point for the development of the above mentioned bin definition files (xdf).
A free chiptuning software combined with competitive prices (70 euro) are the milestones of our philosophy.
Through the definition files, the remapping software TunerPro identifies the engine working parameters which allow to obtain the maximum power and torque without affecting the degree of reliability.
Please note: the maps listed may not be present in all vehicles because of the different software update and calibration numbers.
Prices
Prices (70 euro) and supported vehicles are available in the main Cars bin definition files area.
Buy the XDF from our shop.
Dyno Tests
Example of Stage1 on Dodge Ram 1500 5.7L V8: +35hp / +40Nm
TunerPro available maps
- Air Calculation: volumetric efficiency – air charge model, cylinder filling correction by IAT and MAP, cylinder filling correction by ECT and MAP, nominal air charge calculation map.
- Fuel: injected fuel quantity.
- Spark Advance: base ignition timing map.
- Torque: torque limit vs vehicle speed and engine speed, driver torque request vs accelerator pedal and speed.
- Temperature: predicted exhaust gas temperature.
- Idle: idle speed target vs temperature – main, idle speed target vs temperature – secondary.
- Special Functions: RPM limiter.
