Nissan 1.0L 1.2L 1.4L ecu tuning Hitachi SH7054 MEC using TunerPro xdf.
New TunerPro binary definition files (xdf) for Nissan with engine 1.0L (CR10DE) – 1.2L (CR12DE) – 1.4L (CR14DE) and ecu Hitachi SH7054 (MEC).
Some of the supported vehicles:
- Nissan AD 1.2L
- Nissan Cube 1.4L
- Nissan March 1.0L
- Nissan March 1.2L
- Nissan March 1.4L
- Nissan Micra 1.0L
- Nissan Micra 1.2L
- Nissan Micra 1.4L
- Nissan Note 1.4L
Knowledge, experience, calibration studies and bench tests are the starting point for the development of the above mentioned bin definition files (xdf).
A free chiptuning software combined with competitive prices (70 euro) are the milestones of our philosophy.
Through the definition files, the remapping software TunerPro identifies the engine working parameters which allow to obtain the maximum power and torque without affecting the degree of reliability.
TunerPro is a binary files editor, not able to read and write the engine control unit. To do this, you need an external tool. We don’t provide information about these tools.
Prices
Price for each xdf: 70 euro.
Supported vehicles are available in the main petrol cars bin definition files area.
Read more about our Terms & Conditions.
Buy the XDF from our shop.
Dyno Tests
Example of Stage1 on Nissan Note 1.4L: +4hp / +4Nm
TunerPro available maps
Please note: the maps listed may not be present in all vehicles because of the different software update and calibration numbers.
- Fuel: fuel compensation during acceleration, fuel compensation during deceleration, fuel compensation, fuel compensation for high coolant temperature, target afr, target afr (knock), fuel cut, fuel restore, injection time.
- Ignition: basic spark advance angle map – cold, basic spark advance angle map – main, basic spark advance angle map – high detonation, knock sensor threshold.
- Air Control: MAF.
- Torque: estimated torque delivered.
- Temperature: simulated exhaust gas temperature.
- VVT: intake.
- Idle: idle engine speed by temperature.
- Throttle: target throttle valve opening, target throttle valve opening – calibration.
- RPM Limiters: RPM limiter – cut, RPM limiter – restore, RPM limiter – Reverse cut, RPM limiter – Reverse restore, RPM Limiter.
- Speed Limiter – beta.
