Opel 2.0L C20XE ecu tuning Bosch Motronic M2.5.
We are pleased to present you new TunerPro bin calibration XDF series for Opel engine C20XE with engine control unit Bosch Motronic M2.5.
Also available WinOLS mappacks.
Some of the supported vehicles:
- Opel Astra (F) 2.0L 16V GSI C20XE
- Opel Calibra 2.0L 16V C20XE
- Opel Kadett (E) 2.0L 16V C20XE
- Opel Kadett (E) 2.0L 16V GSI C20XE
- Opel Vectra (A) 2.0L 16V C20XE
Knowledge, experience, calibration studies and bench tests are the starting point for the development of the above mentioned bin definition files (xdf).
A free chiptuning software combined with competitive prices (60 euro) are the milestones of our philosophy.
Through the definition files, the remapping software TunerPro identifies the engine working parameters which allow to obtain the maximum power and torque without affecting the degree of reliability.
Please note: the maps listed may not be present in all vehicles because of the different software update and calibration numbers.
Prices
Prices (60 euro) and supported vehicles are available in the main petrol cars bin definition files area.
Buy the XDF from our shop.
Dyno Tests
Example of Stage1 on Opel Calibra 2.0L 16V C20XE: +8hp / +7Nm
TunerPro available maps
- Fuel: fuel – full load, fuel – partial throttle, fuel – idle, correction of injection duration by voltage, injection correction by air temperature, temperature based injection correction.
- Ignition: spark advance – full load, spark advance – partial throttle, spark advance – idle, dwell.
- Idle: desired idle engine speed.
- Air Calculation: AFM – air flow meter.
- Temperature Sensor Convertion.
- Fuel Cut Off in Deceleration.
- RPM limiter.
