
TM Racing Fi 4 stroke remap using TunerPro.

We are pleased to present as world première new bin calibration files (xdf) for TM Racing 4 stroke FI with engine control unit Emoticom.
Supported motorcycles:
- TM Racing EN 250 Fi 4T
- TM Racing EN 300 Fi 4T
- TM Racing EN 450 Fi 4T
- TM Racing EN 530 Fi 4T
- TM Racing FT 450 Fi 4T
- TM Racing FT 530 Fi 4T
- TM Racing MX 250 Fi 4T
- TM Racing MX 300 Fi 4T
- TM Racing MX 450 Fi 4T
- TM Racing MX 530 Fi 4T
- TM Racing SMR 450 Fi 4T
- TM Racing SMR 530 Fi 4T
- TM Racing SMX 250 Fi 4T
- TM Racing SMX 450 Fi 4T
- TM Racing SMX 530 Fi 4T
and all TM motorcycles 4 stroke fuel injected.

Using TunerPro, it is feasible to overcome the structural limits set by Emoticom software.
Emoticom software (used through TM cable to read/write the ecu) is the original software used to change engine control unit’s fuel and ignition parameters. It has the following limits:
- fuel correction min / max -1.3 / +1.3
- ignition correction min / max – 8 deg / + 3 deg
However, they can be overcome using our xdf in order to customize your bike. We are also able to manage main ignition timing and the maximum revolutions of engine.
Knowledge, experience, calibration studies and bench tests are the starting point for the development of the above mentioned bin definition files (xdf).
A free chiptuning software combined with competitive prices (40 euro) are the milestones of our philosophy.
Through the definition files, the remapping software TunerPro identifies the engine working parameters which allow to obtain the maximum power and torque without affecting the degree of reliability.
Please note: the maps listed may not be present in all vehicles because of the different software update and calibration numbers.

Prices
Prices (40 euro) and supported motorcycles are available in the main Bikes bin definition files area.
TunerPro available maps
- Fuel: injection auxiliary correction.
- Ignition: main spark advance, advance auxiliary correction.
- Special functions: rpm limiter.
