Triumph ecu tuning Keihin RH850 TunerPro xdf.
New TunerPro bin definition file (XDF) for Triumph with ECU Keihin RH850.
Supported bikes:
- Triumph Speed Triple 1200 RR
- Triumph Speed Triple 1200 RS
- Triumph Street Triple 660
- Triumph Street Triple R 765 my2020
- Triumph Street Triple RS 765 my2020
- Triumph Street Triple R Low 765 my2020
- Triumph Daytona Moto2 765
- Triumph Rocket 3 GT my2021
- Triumph Rocket 3 GT 221 my2021
- Triumph Rocket 3 R my2021
- Triumph Rocket 3 R 221 my2021
- Triumph Tiger 660 Sport my2021
- Triumph Tiger 900 my2020
- Triumph Tiger 900 GT my2020
- Triumph Tiger 900 GT Pro my2020
- Triumph Tiger 900 Rally my2020
- Triumph Tiger 900 Rally Pro my2020
- Triumph Trident 660 my2020
With our XDF you can modify some engine parameters like fuel maps depending on throttle position and intake pressure, target lambda afr map, main spark advance maps, ride by wire, cooling fans temperature, rpm limiters, lambda sensor removal, etc.
Knowledge, experience, calibration studies and bench tests are the starting point for the development of the above mentioned bin definition files (xdf).
A free tuning software combined with competitive prices (70 euro) are the milestones of our philosophy.
Through the definition files, the remapping software TunerPro identifies the engine working parameters which allow to obtain the maximum power and torque without affecting the degree of reliability.
TunerPro is a binary files editor, not able to read and write the engine control unit. To do this, you need an external tool. We don’t provide information about these tools.
Prices
Price for each xdf: 70 euro.
Supported vehicles are available in the main motorcycles bin definition files area.
Read more about our Terms & Conditions.
TunerPro available maps (example of Street Triple 765)
Please note: the maps listed may not be present in all vehicles because of the different software update and calibration numbers.
- Fuel: air fuel ratio, main fuel table by RPM and pressure cyl 1, main fuel table by RPM and pressure cyl 2, main fuel table by RPM and pressure cyl 3, main fuel table by RPM and throttle cyl 1, main fuel table by RPM and throttle cyl 2, main fuel table by RPM and throttle cyl 3.
- Ignition: ignition advance angle characteristic map gear 1, ignition advance angle characteristic map gear 2, ignition advance angle characteristic map gear 3, ignition advance angle characteristic map gear 4-5, ignition advance angle characteristic map gear 6, ignition advance angle characteristic map Neutral.
- Ride by Wire: ride by wire – Rain, ride by wire – Road, ride by wire – Sport-Track.
- Torque: optimum torque.
- Fans Control.
- Special Functions: RPM Limiters, speed limiter, lambda deactivation.
