Suzuki Maruti 1.2L and 1.5L VVT engine K12C, K12M and K15B tuning maps.
New maps definition (xdf) series for Maruti Suzuki 1.2L and 1.5 VVT. Engine code supported are: K12C, K12M, K15B. Engine control unit is Bosch ME17.9.64.
Supported vehicles:
- Suzuki Baleno 1.2L VVT
- Suzuki Baleno 1.2L VVT Dualjet
- Suzuki Baleno 1.2L VVT Dualjet
- Suzuki Carry 1.5L VVT
- Suzuki Ciaz 1.5L VVT
- Suzuki Dzire 1.2L VVT
- Suzuki Dzire 1.2L VVT Dualjet
- Suzuki Ertiga 1.5L VVT
- Suzuki Ignis 1.2L VVT
- Suzuki Ignis 1.2L VVT Dualjet
- Suzuki Jimny 1.5L VVT
- Suzuki Ritz 1.2L VVT
- Suzuki S-Cross 1.5L VVT
- Suzuki Solio 1.2L VVT Dualjet
- Suzuki Splash 1.2L VVT
- Suzuki Swift 1.2L VVT
- Suzuki Swift 1.2L VVT Dualjet
- Suzuki Vitara Brezza 1.5L VVT
- Suzuki Wagon R 1.2L VVT
- Suzuki XL6 1.5L VVT
- Suzuki XL7 1.5L VVT
- Toyota Glanza 1.2L VVT
- Toyota Glanza 1.2L VVT Dualjet
- Toyota Urban Cruiser 1.5L VVT
- Mitsubishi Delica D:2 1.2L VVT Dualjet
Through the definition files, the software TunerPro identifies the engine working parameters which allow to obtain the maximum power and torque without affecting the degree of reliability.
Please note: the maps listed may not be present in all vehicles because of the different software update and calibration numbers.
Prices
Prices (60 euro) and supported vehicles are available in the main petrol cars bin definition files area.
TunerPro available maps
- Fuel: nominal lambda for component protection, lambda at WOT, minimum setpoint value for component protection, lambda efficiency, enrichment for component protection during load dynamic.
- Ignition: minimum ignition angle, knock detection factor characteristic map cylinder counter, ignition advance angle characteristic map, optimal ignition advance angle map.
- Torque: maximal inner torque in function monitoring, driver’s behaviour, calculation of driver commande torque – driver behaviour, optimum engine torque, lookup table minimum defined efficiency.
- VVT: nominal angle of camshaft – intake, nominal angle of camshaft – exhaust.
- Throttle: Standardised air mass flow through throttle valve, desired throttle angle.
- Temperature: map for steady-state temperature at manifold at homogeneous operation.
- Air calculation: map for calculation of nominal charge.
- Special functions: rpm limiter in neutral gear, rpm limiter, rpm limiter by gear, speed limiter.
