info@oldskulltuning.com

Yamaha MT09 Tracer 9 ecu tuning Denso RH850 with TunerPro

yamaha mt09 tuning denso rh850 with tunerpro

Yamaha MT09 and Tracer 9 my2021 tuning with TunerPro.

yamaha mt09 tuning denso rh850 with tunerpro

New TunerPro XDF for Yamaha MT09, Tracer 9 and Tracer 9 GT my2021 with ECU Denso RH850 (file size 2MB).

With our XDF you can modify some engine parameters like fuel maps depending on throttle position and intake pressure, target lambda maps, main spark advance maps, cooling fans temperature, ride by wire maps, speed limiter, rpm limiters, etc.

Some of the supported ecu:

  • B7N-8591A-00
  • B7N-8591A-01
  • B7N-8591A-XX
  • BAP-8591A-00
  • BAP-8591A-01
  • BAP-8591A-11
  • BAP-8591A-20
  • BAP-8591A-60
  • BAP-8591A-XX
  • B5U-8591A-00
  • B5U-8591A-XX

Knowledge, experience, calibration studies and bench tests are the starting point for the development of the above mentioned bin definition files (xdf).

A free tuning software combined with competitive prices (70 euro) are the milestones of our philosophy.

Through the definition files, the remapping software TunerPro identifies the engine working parameters which allow to obtain the maximum power and torque without affecting the degree of reliability.

TunerPro is a binary files editor, not able to read and write the engine control unit. To do this, you need an external tool. We don’t provide information about these tools.

yamaha tracer 9 ecu tuning with tunerpro xdf

Prices

Price for each xdf: 70 euro.

Supported vehicles are available in the main motorcycles bin definition files area.

Read more about our Terms & Conditions.

Dyno Tests

Example of Stage1 on Yamaha MT09: +6hp / +6Nm

TunerPro available maps

Please note: the maps listed may not be present in all vehicles because of the different software update and calibration numbers.

  • Fuel: fuel by RPM and pressure cyl 1, fuel by RPM and pressure cyl 2, fuel by RPM and pressure cyl 3, fuel by RPM and throttle cyl 1, fuel by RPM and throttle cyl 2, fuel by RPM and throttle cyl 3, target lambda by pressure, target lambda by throttle.
  • Ignition: main spark advance neutral, main spark advance cyl 1, main spark advance cyl 2, main spark advance cyl 3, dwell.
  • Ride by wire: throttle – ride by wire mode A (divided by gear), throttle – ride by wire mode B (divided by gear), throttle – ride by wire mode C (divided by gear), throttle – ride by wire mode D (divided by gear), ETV multiplier, throttle limiter.
  • Fans Control.
  • Torque: maximum engine torque, optimum engine torque.
  • Idle: idle engine speed.
  • RPM Limiters.
  • Speed Limiter.
yamaha mt09 denso ecu tuning tunerpro xdf

Tags: ,

Hello Tuner!

Subscribe to our weekly Newsletter?

Accept privacy policy